A leaky tap repair is normally very easy. All you have to do is identify what causes the leak and then try to fix that problem. Most frequently, leaks are due to problems with the washer and repairing is a simple task. Remember that washers can be placed and arranged in two different ways. Either using a nut or by using a pin. The nut is mostly closed because of lime deposits or perhaps even due to the flatness of the surface

You just need to do is follow the following steps:

If the leak is from the nozzle then it is mostly due to a washer problem.

First turn of the water or you will get drenched.

If you find a nut putting the washer in its space Washer Repair Los Angeles, unscrew it with the help of a spanner and then pry it off using a screwdriver. This may be difficult to do, so you can apply oil around the washer and then try after the oil has soaked in.

Suppose the nut is difficult to remove you can just replace the washer along with a jumper.

Fit the new washer, and then make sure you apply grease at the end of the tap before you reassemble it. You can get a silicone gel that is specially used by plumbers or even use Vaseline which will work just as well.

Make sure you stick the spout and the valve should also be tightened.

And there you have it. Most washers are cheap and it is very easy to replace them, so make sure you do that once in a while, even if your washer looks good.

Fix Your Washer Problems Without Repairman

Leave a Reply

Your email address will not be published. Required fields are marked *